5 Tips to Troubleshoot Netgear WiFi Extender Problems

If your Netgear WiFi extender not working at its best or running slower than usual, then here’s how to troubleshoot Netgear WiFi extender issues.

It has been found that most WiFi issues can be resolved by rebooting the device. So, before you try anything else, unplug the socket of your extender for some time. If it does not get you any results, this troubleshooting guide will provide you with 5 ultimate tips to deal with Netgear WiFi extender not working issues.

Tip 1: Check the LED Lights Status to Troubleshoot Netgear WiFi Extender

A row of lights are available on the Netgear extenders. Every light on the device has its meaning. Usually, all the lights should be green to make the device work efficiently. Just in case you find orange or red light on your range extender. Then know that something is wrong and needs your consideration.

If any of the lights are not showing green, then check the cable you have used for connecting the router and extender. It could be loose or may have broken. Fix the issue either by replacing the cable or fixing the current one (if needed).

Tip 2: Contact Your Internet Service Provider

Your Netgear extender will not work if there is an Internet outage in your area. So, confirm the same by contacting your Internet Service Provider.

If there is no such issue from the end of your ISP, check with him and confirm. Whether you have the availability of sufficient data or not. If not, ask him to upgrade your data plan and see if this fixes the non-working issue of your range extender.

Tip 3: Remove Signals Blocking Obstructions to Troubleshoot Netgear WiFi Extender issues

Your Netgear extender might not be working seamlessly because it is not placed at the right location. To get flawless WiFi signals, it is suggested that you not only keep the extender within the range of your host router but also in the central location of your home.

Apart from that, it is necessary to keep the extender away from things causing WiFi interference like metal objects, aluminum studs, Bluetooth speakers, baby monitors, fish tanks, etc.

Tip 4: Check for IP Address Conflicts

It is expected that the IP of your device conflicts with the IP of your extender, i.e. 192.168.1.250. This is to inform you that each of your devices must have different IP addresses. If they are same, you will keep facing the extender not working issue.

To resolve the IP conflict issue on your system, simply put the device to sleep mode for some time – in the case of MAC. Wait for a few minutes and check if your extender is now working fine or not.

Tip 5: Update Netgear wifi Extender Firmware

If you have not updated the firmware of your range extender for a long time now. Then it’s time to bring an update to the device.

This can be done by checking the settings of your range extender. If the availability of any new firmware version you can see for your device, get the same right away. While updating the firmware, however, keep in mind to get it according to the model number or product line of your Netgear WiFi range extender. Also, never interrupt the firmware update process of your device. Else the issue can get worsen and your extender can become non-operational forever.

Bonus!

Although the above-given tips will help you fix the nonworking issue for your range extender. Just in case you got no luck, we have a bonus point for you.

Change the password of your extender if you have not yet initiated the same. This is suggested because your WiFi might be getting leeched by your neighbors. Or, you have connected dozens of devices to the network of your extender. In both cases, changing the password of your extender can prove to be of big help.

For every device, there will be a need for a new password to establish connection. So, you can connect only those devices needing access to the WiFi.

In a Nutshell

Here’s to hope that the tips offered in the write-up will take your internet-using experience to the next level by fixing various extender issues.

If you still want to gift more to your extender, then reset and configure it again from scratch. Read more from Canalfire.