My Netgear Router is Not Sending a Wireless Signal. Help!

Individuals across the world set up Netgear routers so that they can have a seamless internet experience. But, the situation becomes annoying when the router does exactly the opposite of what it is intended to. In other words, it fails to route the modem’s signals to the devices in your house. In case you’re also wondering why your Netgear router is not sending a wireless signal, then it might be due to improper placement.

Therefore, get the problem fixed by making some changes in the location of your Netgear router. Know that the improper location is one of the major factors contributing to Netgear router login issues. To keep them miles away from you, consider keeping the router at a location that satisfies the following parameters.

Parameters for Netgear Router Location

  • The location of your WiFi router is supposed to be neat and well-ventilated. However, you must not make your device sit at a location where the sun focuses its rays directly. Plus, avoid selecting a location near direct heat sources.
  • If possible, try to place the router in the central location of the house. Remember that you cannot keep the router inside a cabinet or under the cupboard. Else, you’ll fall victim to issues similar to the one you’re facing i.e. Netgear router is not sending a wireless signal.
  • Your Netgear WiFi router must be present at a location where minimal WiFi interference is present. In other words, you should avoid keeping it near microwave ovens, televisions, refrigerators, and similar devices. Distance from fish tanks should be maintained too.

So, these were the parameters that must be kept in mind while deciding on a new location for a Netgear wireless router. However, if you see no positive outcome even after relocation, you need to spend some more time troubleshooting the problem. The next section highlights what to do in that case.

Fixed: Netgear Router is Not Sending a Wireless Signal

Tip 1: Fix the Router-Modem Connection

You need to pay attention to the connection between your Netgear router and the internet modem. Both devices are capable of communicating wirelessly and via a wired source. If you’ve established wireless communication between both devices with the help of the WPS button on Netgear router, then you have to keep an eye on the distance separating them. It must be so appropriate that their wireless signals neither struggle to communicate nor get involved in a clash.

However, if it is an Ethernet cable holding your devices together, then you need to check its physical condition. It must not be damaged from anywhere. If it is, then we’re not shocked that your Netgear router is not sending a wireless signal. Additionally, ensure that the ports of your devices are perfectly working and the devices are connected strongly.

Tip 2: Give Some Rest to the Router

Can you climb a mountain when tired? Of course not! Well, the same is the situation with your Netgear WiFi router. Perhaps, you’ve taken so much work from it that it is now denying to do its job. Yes, we agree that you can access the internet on multiple devices always. But, being a part of a technical family, it also demands rest. Keeping that in mind, give some rest to your wireless router.

For this, all you have to do is switch off the router, unplug its power cord [if available] from the wall socket, and keep it aside. Once you feel that enough time has been given to the router, re-create connections and power up the router so that it can resume its job. Know that rebooting the router helps in eliminating technical glitches that do almost no work other than degrading the performance of the home network.

Final Words

The Netgear router is not sending a wireless signal problem is quite common these days. Every third user can be found struggling with it. But, the best thing is that you do not need to spend much time troubleshooting it. Here, we discussed how the router’s placement and connection with the internet modem can send an invitation to the problem in the discussion.

You also learned how overworking status of the router can be a potential cause behind the poor output and how to fix it. With that said, we are now wrapping up the post. It is expected that the issue has been bid farewell. Thanks for reading the post!